ECOCLIP ... SHOOT THEM IN, CLIP ON THE CABLE, AND YOU´RE DONE ...

NEW
Laying cables is now simpler and quicker than ever.
 

Video-Clip (948 KB)
The traditional method of fastening cable clips to walls involves using your hands and a hammer. This is not only awkward, it also takes a lot of time. In addition, it doesn´t always yield securely attached clips, and frequently is the cause of a bruised thumb.

Now you can simply "shoot" cable clips in place. The idea of collated cable clips has made this possible, and a complete system for safe, efficient, cable installation is now available to professional electricians.

At the heart of the system is the specially developed
clip-nailer:

Since it is powered by compressed air, it is extremely rugged, needs virtually no maintenance, practically never wears out, and packs quite a punch, in addition to providing numerous other benefits:
 
Easy operation:   Safe operation:
     
  • Weights just 1.65 kg, and may be comfortably held and guided with one hand.
  • Ergonomically designed, provides a secure grip.
  • Requires no adjustment.
  • Sets clips at intervals of the cartridge length.
  
  • Triggering requires overcoming a preset resistance.
  • Cannot fire until its safety release has been driven inward by, e.g., pressing its tip flush up against a wall.
  • Triggering is disabled (i.e., there will be no bursts of compressed air) when the cartridge is empty.
A general-purpose tool:   Quality through an through:
     
  • A single cartridge accommodates clips of all sizes and lengths.
  • Rapid reloading: withdraw the cartridge, refill it with clips, and reinsert the cartridge.
  • Suitable for use on virtually any type of wall material (unsuitable for use on cast concrete)
  
  • All-metall, die-cast, aluminium housing
  • Side-loading, aluminium cartridge
  • Brass, quick-connect, compressed-air fitting
  • Ultraflexible, lightweight, compressed-air hose equipped with anti-kinking protection (available as an option)
   
An idea, both simple and convincing:

Cable clips come supplied in strips, instead of as loose items, and are fed to the clip-nailer like the
link-ammunition used by machine guns. Clips are not broken apart at their rupture joints until just before they are expelled.

Our collated cable clips are patented and VDE-certified.
   

A pratical feature - the integral metal loop for hanging on a belt		 Hold twice as securely:
  • Supplied preassembled, complete with nails that are an interference fit in clips.
  • High tensile-strength, galvanized, hardened, steel nails with a Rockwell hardness of 50 HRC.
  • Clips are fabricated from high-impact-resistance,
    low-pressure-molded polypropylene.
  • Clips are flame-retardant and UV-resistant.
  • Clips are flexible in order to allow easy cable insertion and provide superior clamping actions that will hold cables securely in place.
  • Provide secure anchoring in plaster, stone, masonry joints, and wood.
   
Recommended Nail Lengths for Typical Materials:
Material Recommended Nail Length (in mm)
  9,5 18 25 30 35 45
Breezeblocks
Insulating mortar joints        
Gypsum wallboard
Wooden structures  
Sandstone
Cinder blocks        
Bonded joints
Light concrete    
Masonry joints
OSB-slabs  
Lintels
"Ytong"        
Cement joints
Bricks          
 
Neat, rapid, cable-laying anywhere

For surface or subsurface installations, or use on prefabricated structures with wooden wall studs. Have also proven superior on sandstone and "Poroton" and "Liapor" blocks. Even compressed-air lines and heating pipes may be laid using this system.
     
 
 
The complete system for the professional electrcian.
 
ECOCLIPS collated cable clips  

Nail Length/Qty

ECOCLIPS Ø 8 mm

ECOCLIPS Ø 10 mm
9,5 mm / 400 020550895 02051095
18 mm / 400 020550818 02051018
25 mm / 400 020550825 02051025
30 mm / 400 020550830 02051030
35 mm / 400 020550835 02051035
45 mm / 400 020550845 02051045
   
ECOCLIPPER Clip-Nailer      
Supplied on a "Systainer" W70011845
Supplied in a carrying case (not shown) W70001845
Weight Operating Pressure Air Consumption Dimensions (LxWxH)
1.65 kg approx.
 4 - 7 bar		 approx.
 0.85 l/nailing		 290x60x265 mm
           
           
ECOCLIPTAINER     W80000003
Storage "Systainer", less contents
           
           
       
           
ECOHOSETAINER Hose Kit   W70000001
Hose reel, complete with 30 m of 9 mm dia. supply hose
           
           
       

           
           
ECOAIRTAINER Compressor   W70000002
Intake Pressure Weight Electrical Supply  
115 l/min max. 8 bar 23.5 kg 230 VAC/50 Hz  
           
           
   
   
Everything is tip-top on our "Systainers".  
               
Portable anytime. Stacked and coupled in order to reduce space - all sytem components may be simply, easily, transported to the construction site, and on the construction site.

Even when used on-site, our "Systainers" remain largely coupled to one another. The ECOTAINER and the ECOCLIPPER are interconnected via ECOHOSETAINER units, where the hoses involved are routed through interconnection ports.